Miele G 643SC-Vi 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Miele G 643SC-Vi에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele G 643SC-Vi 28 페이지. 60 cm wide fully integrated dishwasher

When fitted the door front can be ad-

justed up to a maximum of 2 mm up-

wards or downwards to match adjoining

unit fronts.

^ Open the dishwasher door slightly.

^ With the door open, press the front

panel on one side against the door

outer panel.

^ Adjust the height of the door front on

this side using the lower recessed

adjusting screw (TORX T20).

higher = turn clockwise

lower = turn anti-clockwise

^ Then secure the door front on this

side by tightening the upper re-

cessed fixing screw (TORX T20) at

the side of the machine door outer

panel.

^ Repeat the process on the other side

of the door.

^ Close the dishwasher door.

^ Check the alignment of the door

panel again.

^ If it is not correctly aligned you may

need to loosen the screws and re-

adjust it to the correct alignment.

Once satisfied that the alignment is cor-

rect:

^ Open the dishwasher door.

^ Tighten all fixing screws (upper

screws, TORX T20) at the sides.

^ Plug fixing screw and height adjust-

ment screw recesses with the plastic

stoppers supplied.