Miele GDU 45/65 피팅 지침 매뉴얼 - 페이지 17

{카테고리_이름} Miele GDU 45/65에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele GDU 45/65 48 페이지. Decor set

Screw the plinth facia on with the cut-

ting lines towards the top, and pull

out evenly to adjust to the kitchen

plinth rebate.

Please note:

The plinth facia cannot be pushed

back. It must be unscrewed, so that

both spring clips can be pushed to the

sides and the brackets pushed in.

Carefully open the dishwasher door

until the rear bottom edge of the dish-

washer door hits against the plinth

facia.

Place a pencil horizontally at the

front lower edge of the dishwasher

door and draw a horizontal line

across the plinth facia.

Unscrew the plinth facia.

To shorten the plinth facia:

– Trim with the saw along this line,

or better

– cut along one of the cutting lines

provided if this is close enough.

Score the cutting line along the

plinth facia and then break off.

Screw the plinth facia back on to the

brackets, with the cutting line at the

bottom.

If the door does not open smoothly the

plinth facia may need further trimming.