Miele HG02 설치 지침 매뉴얼 - 페이지 14

{카테고리_이름} Miele HG02에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele HG02 40 페이지. G 600 / g 800 series dishwasher

^ The rear leveling legs can be ad-

justed with a T20 Torx screwdriver by

turning the screws at the front of the

slide skis.

To raise the machine turn clockwise.

To lower the machine turn counter

clockwise.

Several turns may be needed to set the

correct height. Do not use a power

screwdriver.

^ Adjust the front leveling legs by

pushing on the feet with a slotted

screwdriver.

^ Tipping the machine slightly back-

wards, if possible will make adjusting

the front legs easier. Make sure the

machine is level when adjustments

are complete.

The dishwasher should be raised

until it just touches the underside of

the countertop.

If you are installing a prefinished unit

dishwasher proceed to

If you are installing a factory made

door panel (GDU Decor Set), refer to

the instruction manual enclosed with

the panel at this time.