Miele Integrated slimline dishwasher 설치 지침 매뉴얼 - 페이지 17
{카테고리_이름} Miele Integrated slimline dishwasher에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele Integrated slimline dishwasher 36 페이지. Integrated slimline dishwasher
페이지 인쇄^ Push the dishwasher into its opening
and adjust the height.
^ Measure the distance
round hole in the machine outer door
panel (shown in inset) and the lower
edge of the adjoining cabinet door.
^ Place the door panel on a flat sur-
face, good side face down, being
careful not to scratch the surface.
Make certain that the bottom of the
panel is towards you.
^ Using a pencil, lightly draw a vertical
^ Draw a horizontal line
between the
Two piece panels should be made so
that any joining hardware is flush with
the back of the panel. Failure to do this
may impede proper operation of the
dishwasher.
In certain instances, you may be able
to use the mounting bracket supplied
with the machine to secure both pieces
to the dishwasher. Consult your cabinet
supplier / maker for the best method of
joining the panels.
centerline on the panel (See the illus-
tration on the next page).
from the bottom edge of the panel.
When mounting the two pieces,
make sure that the desired finished
panel height is maintained.
inches up
17