Miele NOVOTRONIC G 842 SC PLUS 사용 설명서 - 페이지 18

{카테고리_이름} Miele NOVOTRONIC G 842 SC PLUS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele NOVOTRONIC G 842 SC PLUS 48 페이지. Miele dishwasher user manual
Miele NOVOTRONIC G 842 SC PLUS에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지)

페이지 인쇄

Before

using for the first time

Salt indicator

When the salt reservoir is empty, the

"Salt-PC" indicator will light, indicating

that it should be refilled with reactiva-

tion sail

Start

Intake/Drain O

Salt P_/

Rinse aid

After the reservoir has been filled, the

water softener is automatically

reacti-

vated the next time the dishwasher is

started. The "Salt" indicator will be lit

during this process.

Bypassing

the salt indicator

If your water is soft (below 8 gr/ga!) the

salt reservoir should not be filled with

salt. The indicator will remain lit and

should be disregarded

or bypassed.

[] Remove the salt reservoir cap.

Looking into the salt reservoir, you will

see the top of the float chamber on the

right hand side, _.

[] Using a screwdriver, carefully pivot

the float chamber towards the center

of the reservoir.

[] Using needle nose pliers, pull the

cap, _, off of the float chamber, and

remove the float, ,_@.

Replace the float chamber cap, push

the chamber back into its upright posi-

tion, and replace the salt reservoir cap.

The "Salt" indicator should no longer be

lit.