Miele PG 8050i 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Miele PG 8050i에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PG 8050i 20 페이지. Professional dishwasher

Installation

6. Adjusting the door springs

^ Open the dishwasher door halfway.

If the door remains in this position when

released, the springs are adjusted

correctly.

If the door drops, the tension on the

springs needs to be increased.

If it closes on its own, the tension on the

springs needs to be decreased.

The adjusting screw is located behind

the door in the upper front strip, on the

left hand side of the dishwasher.

Please note:

If the door front is too heavy for the

door springs (i.e. the door falls open),

then stronger springs should be fitted.

Please contact your Miele dealer or the

Miele Service Department for advice.

^ Open the dishwasher door halfway.

The door springs are easier to adjust

when the door is only half open.

^ To adjust the door springs use a T20

Torx or a small slotted screwdriver

and turn the screw:

- clockwise to increase the tension

- counterclockwise to decrease

the tension.