Miele PG 8172 ECO 사용 설명서 - 페이지 31

{카테고리_이름} Miele PG 8172 ECO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele PG 8172 ECO 42 페이지. Commercial dishwashers

PIN menu

12.6 Changing the amount of detergent / rinse aid

When a new detergent or rinse aid is used, it may be necessary to change the dosing amount. Please

observe the dosing recommendations on the packing.

The dosing amount can be adjusted separately for every standard programme.

IMPORTANT

In the next menu, only the dosing amount of the internal dispenser pumps is changed.

Please consult the corresponding device documents for external dispenser pumps.

Opening the menu

 Press the button.

Changing the detergent dosing amount

 Select a wash programme: press one of the three buttons (1).

INFO

- The display of the three pictograms depends on the type of commercial dishwasher.

- The dosing amounts for each wash programme can be set separately.

 The background of the selected button (1) and button (4) changes to white.

 The current detergent dosing amount and the internal name (P003) is displayed in field (3).

 Change the dosing amount with the scroll buttons (2).

 Press the button (5) in order to save the entry.

 Button (5) lights up briefly in white.

Changing the rinse aid dosing amount

 Press the button.

 The background of the button becomes white.

 The remaining steps are much the same as the steps for changing the detergent dosing amount.

Therefore, proceed as in the section "Changing the detergent dosing amount".

 Press the back button to exit from the menu.

The water countdown indicator must be reset if on machines with an external partial or full

demineralisation unit this symbol flashes on the screen.

 Contact an authorised service technician to exchange the external partial or full demineralisation unit.

Resetting the water countdown indicator

 Tap the following buttons in turn:

 Press the back button to exit from the menu.