Miele ULTRA FULLSIZE DISHWASHER 설치 지침 매뉴얼 - 페이지 32

{카테고리_이름} Miele ULTRA FULLSIZE DISHWASHER에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele ULTRA FULLSIZE DISHWASHER 40 페이지.

If the dishwasher drain hose is

connected to a

vented. Otherwise the water inside the

dishwasher may siphon out during the

wash program.

To vent the drain:

^ Open the dishwasher door and

remove the lower basket.

^ Cut off the vent cap located at the

right rear of the triple filter system, as

illustrated.

the drain must be

Since all Miele dishwashers are

equipped with an odor trap and non-

return valve, the drain hose can be

connected directly to the drain pipe as

illustrated.

If plumbing codes require an external

air gap on the discharge side of the

dishwasher, the following requirements

must be met:

– No part of the drain hose should be

higher than 39" (1 m).

– If installed horizontally, the drain

hose can be up to 12 ft (3.5 m) long.

If the drain hose is angled upwards

in any way, it cannot be longer than

5 ft (1.5 m).

– The drain connection should be

made as close as possible to the

dishwasher.

– The internal diameter (

of the drain hose should not be

reduced at any point.

" or 22 mm)