Miele CS 1028 작동 및 설치 지침 - 페이지 35

{카테고리_이름} Miele CS 1028에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1028 44 페이지. Combiset
Miele CS 1028에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 변환 지침 (40 페이지), 작동 및 설치 지침 (44 페이지)

페이지 인쇄

This appliance must be grounded

according to local or national codes.

All electrical work should be

performed by a qualified electrician

in accordance with local codes and

with the:

National Electrical Code

ANSI / NFPA No. 70

for the USA

Canadian Electrical Code Part I

for Canada

(CSA Standard C 22.1).

WARNING

Disconnect the appliance from the

main power supply before

installation or service. To reduce the

risk of electric shock, make sure that

the appliance is properly grounded

after installation.

Power supply

The automatic ignition requires that the

combiset be connected to a 120 VAC,

60 Hz power supply. The supply line

should be protected by a 15 A fuse.

Actual power consumption (during

ignition only) is 25 W.

This appliance is equipped with a

4 ft (1.2 m) long power cord that is

ready for connection to the appropriate

outlet.

Place the power outlet so that it is

accessible after the appliance has been

installed in the countertop.

Electrical connection

This appliance is equipped with a

three-prong grounding plug to

prevent shock hazards. It should be

plugged directly into a properly

grounded outlet. Do not cut or

remove the grounding prong from

the plug. If the plug does not fit the

outlet, have the proper outlet

installed by a licensed electrician.

To guarantee the electrical safety of

this appliance, continuity must exist

between the appliance and an

effective grounding system. It is

imperative that this basic safety

requirement be met. If there is any

doubt, have the electrical system of

the house checked by a qualified

electrician.

Note to the installer

Please leave these instructions with the

consumer or the appliance.