Miele DG 163 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} Miele DG 163에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DG 163 12 페이지.
페이지 인쇄
Installing the oven
All electrical work should be performed
by a licensed electrician, in strict ac-
cordance with national and local safety
regulations and standards.
Note to installer:
Please leave these instructions with
the consumer.
Power supply:
Please check the dataplate for verifi-
cation of:
240 VAC; 60 Hz
15A, 240 V
L1, L2, Ground
Caution:
Disconnect main power supply be-
fore servicing. To reduce the risk of
electrical shock, make sure that the
appliance is properly grounded
after installation.
WARNING : THIS APPLIANCE
MUST BE GROUNDED
8
For USA only
The appliance is provided with 3 termi-
nal leads, 1 black wire (L1), 1 red
wire (L 2) and 1 green wire (GND)
which have to be connected to a dedi-
cated junction box. Connect the black
wire to L1, the red wire to L2 and the
green wire to GND.
ALSO SEE THE WIRING DIAGRAM
PROVIDED WITH THE APPLIANCE.
For CDN only
The appliance is provided with 3 termi-
nal leads: 1 black wire, 1 red wire and
1 green wire which have to be con-
nected to a separate overcurrent pro-
tection device (fusebox or circuit
breakers).
All hot wires (black and red) have to be
fused individually before connecting
them to the main power supply leads.
Use 15 Amp fuses or circuit
breakers for appliances rated 240
VAC.
Connect black terminal wire to
L1 (black) and red terminal wire to
L2 (red). The green terminal wire
(ground) has to be connected directly
to the equivalent colored power supply
leads.
All connections must be done in a
proper way.
ALSO SEE THE WIRING DIAGRAM
PROVIDED WITH THE APPLIANCE.