Miele AWG 102 작동 및 설치 지침 - 페이지 4

{카테고리_이름} Miele AWG 102에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele AWG 102 28 페이지. External motor roof installation
Miele AWG 102에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄

Warning and Safety instructions

This appliance complies with all

relevant safety requirements.

Inappropriate use can, however,

lead to personal injury and damage

to property.

To avoid the risk of accidents and

damage to the appliance, please

read these instructions carefully

before using it for the first time.

They contain important information

on the safety, installation, use and

maintenance of the appliance.

Keep these instructions in a safe

place and ensure that all users are

familiar with the contents. Pass them

on to any future owner of the

appliance.

Correct application

The appliance is intended for

household use only.

It must only be used as a domestic

appliance to extract vapours and

remove odours from cooking.

This external motor must only be

used in conjunction with a Miele "...

EXT" model cooker hood.

Any other usage is not supported by

the manufacturer and could be

dangerous. Miele cannot be held liable

for damage resulting from incorrect or

improper use or operation of the

appliance.

Technical safety

Before installation, check the

appliance for visible signs of damage.

Do not install and use a damaged

appliance. A damaged appliance could

be dangerous. Before connecting the

appliance to the mains electricity

supply, make sure that the voltage and

frequency details given on the data

plate correspond with the on-site

electricity supply (see "Electrical

connection" and "Technical data"),

otherwise the appliance could get

damaged. Consult a qualified

electrician if in any doubt.

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with local and national safety

regulations. It is most important that this

basic safety requirement is present and

tested regularly, and where there is any

doubt, the household wiring system

should be inspected by a qualified

electrician. The manufacturer cannot be

held liable for the consequences of an

inadequate earthing system (e.g.

electric shock).

For safety reasons, this appliance

may only be used when it has been

fully installed.