Miele DA 1260 작동 및 설치 지침 - 페이지 22

{카테고리_이름} Miele DA 1260에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 1260 44 페이지.
Miele DA 1260에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (44 페이지)

페이지 인쇄

Cleaning and care

Changing a light bulb

The bulbs should be replaced with the

following:

Bulb type .............................. LED, GU10

Power ............................................... 3W

Replacement bulbs are available from

Miele.

 Turn off the blower and the lighting.

 Remove the grease filters.

 Disconnect the hood from the

electrical supply before replacing the

bulbs (see "IMPORTANT SAFETY

INSTRUCTIONS").



While the light is turned on, the

bulbs become very hot.

Allow the bulbs to cool down for a

few minutes before changing them.

 Loosen the lamp's securing screw a

little.

 Slide the screw and the lamp

downwards.

 Then tighten the screw again.

 Turn the bulb counter-clockwise and

pull it out.

 Install the new bulb. Observe the

manufacturer's instructions.

 Slightly loosen the screw again, push

the light upwards, and tighten the

screw.

 Reinstall the grease filters.