Miele DA 196-2 운영 및 설치 매뉴얼 - 페이지 4

{카테고리_이름} Miele DA 196-2에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 196-2 32 페이지. Cooker

Miele DA 196-2 운영 및 설치 매뉴얼
This appliance complies with all rele-
vant legal safety requirements. Inap-
propriate use can, however, lead to
personal injury and damage to prop-
erty.
Before installation and before using
for the first time, read the operating
instructions carefully. They contain
important information on safety, in-
stallation, use and maintenance of
the appliance. This way you will
avoid the risk of accidents and dam-
age to the appliance.
Keep these operating instructions in
a safe place and ensure that all us-
ers are familiar with the contents.
Pass them on to any future owner of
the appliance.
This appliance is intended for do-
mestic use only.
It is not a toy! To avoid the risk of injury
do not let children play with it or use the
controls. Supervise its use by the el-
derly or infirm.
The manufacturer cannot be held liable
for damage caused by improper or in-
correct use of the appliance.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the appli-
ance and its surroundings in a clean
condition at all times.
4
Any damage which may be caused by
cockroaches or other vermin will not be
covered by the appliance guarantee.
Before connecting the appliance to
the mains supply, make sure that
the voltage and frequency details given
on the data plate correspond with the
on-site electricity supply; otherwise the
appliance could get damaged. Consult
a qualified electrician if in any doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ap-
pliance and an effective earthing sys-
tem which complies with local and na-
tional regulations. It is most important
that this basic safety requirement is
present and regularly tested. If in any
doubt, the electrical wiring in the home
should be checked by a qualified elec-
trician. The manufacturer cannot be
held liable for the consequences of an
inadequate earthing system (e.g. elec-
tric shock).
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to en-
sure safety. Repairs and other work by
unqualified persons could be danger-
ous, and the manufacturer will not be
held liable.
Ensure power is not supplied to the ap-
pliance until after any maintenance or
repair work has been completed.