Miele DA 210-3 작동 및 설치 지침 - 페이지 27

{카테고리_이름} Miele DA 210-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 210-3 36 페이지. Ventilation system
Miele DA 210-3에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

페이지 인쇄

Mounting plate:

^ Hold the mounting plate up to the

ceiling so that the orange arrow faces

the front of the hood and aligns with

the line drawn on the ceilling.

Mark the position of the four mount-

ing bolts a for securing the mounting

plate and determining the position of

the hole the power cord b will pass

through.

Select the hole providing the shortest

route for the power cable b to reach

the power terminal located at the top

of the hood's chimney.

^ Feed the ductwork and power cable

through their respective holes in the

ceiling.

If 6" (150 mm) ductwork is not possible

then 5" (125 mm) ductwork can be

used in conjunction with a reducing

collar available from the Miele Technical

Service Department (see "Installation /

Air extraction" for further details).

^ Drill four

" (5 mm) holes in the ceil-

ing.

The S10 wall anchors included in the

packaging are not for use in

USA/CDN. Be certain that the ceiling

is stable enough to support the

hood.