Miele DA 210-3 작동 및 설치 지침 - 페이지 15

{카테고리_이름} Miele DA 210-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 210-3 36 페이지. Ventilation system
Miele DA 210-3에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

페이지 인쇄

Before cleaning or servicing the

hood, disconnect it from the power

supply by either removing the fuse,

unplugging it from the outlet or man-

ually "tripping" the circuit breaker.

Cleaning the casing

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the hood. They

will damage the surface.

^ All external surfaces and controls can

be cleaned with warm water and liq-

uid dish soap applied with a soft

sponge.

^ Wipe dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

^ Glass surfaces can be cleaned using

glass cleaner.

Avoid:

– cleaning agents containing soda, ac-

ids or chlorides,

– abrasive cleaning agents e.g. pow-

der or cream cleansers,

– abrasive sponges, e.g. pot scourers

or sponges which have been previ-

ously used with abrasive cleaning

agents.

These will damage the surface.

Cleaning and care

Stainless steel

Stainless steel surfaces can be cleaned

using a non-abrasive stainless steel

cleaner.

To help prevent resoiling, a conditioner

for stainless steel can also be used.

Apply sparingly with even pressure.

Stainless steel colored controls

These controls may become discol-

ored or damaged if not cleaned reg-

ularly.

Do not use a stainless steel cleaner

on these controls.