Miele DA 211 작동 및 설치 지침 - 페이지 37
{카테고리_이름} Miele DA 211에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 211 44 페이지. Decorator wall hood
Miele DA 211에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 치수 매뉴얼 (2 페이지)
페이지 인쇄
^ Remove the protective foil from
chimney extension.
^ Bend the top hanging tabs 45°
inwards. This will make installing the
extension easier. Be careful of sharp
edges.
Recirculation
^ Pull the chimney extension slightly
outwards and snap over the upper
retaining plate B.
When installing for recirculation, ensure
that the vents are positioned so they
line up with the diverter.
Air extraction
^ Screw the extension piece firmly to
the upper retaining plate using two
3.9 x 7.5 mm screws.
^ Cover the screws with the supplied
cap covers.
^ Only for recirculation:
With the slats pointing downwards,
install the recirculation vents through
the extension piece and into the
diverter.
Installation
37