Miele DA 216 사용 설명서 - 페이지 25

{카테고리_이름} Miele DA 216에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 216 36 페이지. Cooker

With a 6 mm Ø bit drill the 2 holes in

the wall and press the S6 plugs into

the holes.

Screw in the plate C with 2 screws

4 x 30 mm and 4.3 underlying

washers.

Vapour guide/canopy

Drill the following holes before fitting

the vapour guide (see the illustration in

the section on fitting the retaining

plates)

DA 206, DA 216, DA 217:

Drill a hole of 6 mm Ø in the middle

taking measurement w into account

and press an S6 plug into the hole.

DA 209, DA 219:

On the line of the middle hole drill 2

holes of 6 mm Ø 500 mm apart tak-

ing measurement w into account

and press S6 plugs into the holes.

To fit the vapour guide (canopy), the

grease filters and the lighting tubes

must be removed. (See section on

Cleaning and Care).

Hang the vapour guide (canopy) on

to the angle brackets of retaining

plate A.

Secure the vapour guide (canopy)

with 5 x 40 mm screws into each

drilled hole.

Installation