Miele DA 216-2 작동 및 설치 지침 - 페이지 25

{카테고리_이름} Miele DA 216-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 216-2 40 페이지. Miele operating and installation instructions cooker hoods da 216-2, da 216-2 ext, da 217-2, da 219-2, da 219-2 ext

페이지 인쇄

Lightly secure retaining plate A into

position using 5 x 40 mm screws

through the two holes and use the

notches to align with the middle line.

Drill 4 more 8 mm ø holes through

the now fitted retaining plate and

press S8 plugs into the holes.

Screw two 5 x 40 mm screws into the

upper two holes.

Hold retaining plate B to the wall and

push up until it is directly below the

ceiling. Use the notches and the

middle line to align it horizontally.

Mark the 2 drill holes on the wall.

Drill two, 8 mm ø holes into the wall,

and push the S8 plugs into the holes.

Screw on the retaining plate with two

5 x 40 mm screws.

Retaining plate C only needs to be

fitted if dimension Y is greater than 365

mm. It provides additional stability for

the extension piece.