Miele DA 217-2 작동 및 설치 지침 - 페이지 26

{카테고리_이름} Miele DA 217-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 217-2 40 페이지. Ventilation system
Miele DA 217-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지)

페이지 인쇄

At a maximum distance of 365 mm

from the ceiling, hold retaining plate

C against the wall and use the not-

ches to align it with the middle line.

Mark the two drill holes.

Drill two 8 mm ø holes into the wall

and press the S8 plugs into the

holes.

Screw on retaining plate C with two

5 x 40 mm screws.

Before fitting the canopy the glass

cover of the lighting tube must first

be removed (see relevant section in

"Cleaning and care").

Hang the canopy on the angle

brackets on retaining plate A.

Secure the canopy. Secure the ca-

nopy with 5 x 40 mm screws into

each drilled hole.

DA 216-2 / EXT, 217-2:

Secure the canopy with a 5 x 40 mm

screw.

DA 219-2 / EXT:

Secure the canopy with two

5 x 40 mm screws.

Replace the glass cover.