Miele DA 219-2 작동 및 설치 지침 - 페이지 18

{카테고리_이름} Miele DA 219-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 219-2 40 페이지. Ventilation system
Miele DA 219-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지)

페이지 인쇄

If the cooker hood is connected for re-

circulation, two active charcoal filters

must be inserted in addition to the

grease filters. These filters absorb nor-

mal kitchen odours.

They are fitted in the canopy above the

grease filters.

Active charcoal filters can be ob-

tained from your dealer or the Miele

Spare Parts Department.

Refer to the section "Technical data"

for type and reference number.

Before fitting or replacing the active

charcoal filters, the grease filters

must first be taken out, (see previous

section for instructions on how to do

this).

The filters are supplied with fitting in-

structions. Ensure these are carefully

followed.

When fitting for the first time:

Set the operating hours counter to

suit your requirements, (see "Oper-

ation - Altering the filter operating

hours counter").

Always replace the filters immediately if

the lamp for the active charcoal filter

touch control comes on, or if they are

no longer effective in absorbing kitchen

odours.

They should, however, be replaced at

least every 6 months.

After fitting new active charcoal fil-

ters, press the active charcoal filter

touch control for approx. 3 seconds

to re-set the operating hours counter.

The indicator lamp will go out.

If the active charcoal filters are re-

placed before the operating hours

counter has reached its maximum,

the active charcoal filter touch con-

trol should be pressed for approx. 6

seconds to reset the counter to zero.