Miele DA 220-3 작동 및 설치 지침 - 페이지 32

{카테고리_이름} Miele DA 220-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 220-3 36 페이지. Ventilation system
Miele DA 220-3에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (32 페이지), 작동 및 설치 지침 (32 페이지)

페이지 인쇄

Air extraction

Never connect an exhaust hood to

an active chimney, dryer vent, vent

flue, or room venting ductwork. Seek

professional advice before connect-

ing an exhaust hood vent to an exist-

ing, inactive chimney or vent flue.

Ductwork with a diameter of less

than 6" (150 mm) should only be

used when absolutely necessary. As

duct diameter decreases, the hood's

performance and sound levels will

be affected.

Important:

If the ductwork runs through rooms,

ceilings, garages, etc. where tempera-

ture variations exist, it may need to be

insulated to reduce condensation. In

some cases, a condensate trap may

also be required to collect and evapo-

rate any condensate which may occur.

When installing a condensate trap,

ensure that it is positioned vertically

and if possible directly above the ex-

haust outlet.