Miele DA 220-3 작동 및 설치 지침 - 페이지 6

{카테고리_이름} Miele DA 220-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 220-3 36 페이지. Ventilation system
Miele DA 220-3에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (32 페이지), 작동 및 설치 지침 (32 페이지)

페이지 인쇄

IMPORTANT SAFETY INSTRUCTIONS

Installation

, WARNING

To reduce the risk of fire, only

use metal ductwork.

When installing the hood, follow the

recommended minimum safety dis-

tances between a Miele cooktop and

the hood:

– 22" (55 cm) above electric cooktops,

– 26" (65 cm) above gas cooktops,

– 26" (65 cm) above an open grill.

If local building codes require a greater

safety distance, follow their require-

ment.

For non-Miele cooking appliances

maintain the safety distances recom-

mended by the appliance manufacturer

in their installation and operating

instructions.

If there is more than one appliance

beneath the hood and they have differ-

ent minimum safety distances always

select the greater distance.

Be careful not to damage hidden

electrical wiring or plumbing when

cutting or drilling into the wall or ceiling.

Do not use an extension cord to

connect the appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance, (e.g.

danger of overheating).

Do not install this hood over

cooktops burning solid fuel.

Any fittings, sealant, or materials

used to install the ductwork must

be made of approved non-flammable

materials.

Never connect an exhaust hood to

an active chimney, dryer vent, vent

flue, or room ventilating ductwork. Seek

professional advice before connecting

an exhaust hood vent to an existing,

inactive chimney or vent flue.

Ducted fans must always be

vented outdoors.

Make sure that the airflow in the

room is sufficient for combustion

and exhausting of all non-electric heat-

ing appliances (water heaters, gas

cooktops, gas ovens, etc.), otherwise

backdrafts may occur. Follow the heat-

ing manufacturer's guidelines and

safety standards or those published by

the National Fire Protection Association

(NFPA), or the American Society for

Heating, Refrigeration and Air

Conditioning Engineers (ASHRAE).

If in doubt, consult an experienced

professional.