Miele DA 227-2 운영 및 설치 매뉴얼 - 페이지 13

{카테고리_이름} Miele DA 227-2에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 227-2 40 페이지. Cooker

The number of hours the appliance has

been in operation is stored in memory.

The indicator lamp for the grease filter

control will light up after 30 hours of

operation. The grease filters must then

be cleaned.

After the grease filters have been

cleaned and put in place, the filter oper-

ating hours counter must be re-set.

To do this, press the grease filter

touch control for about 3 seconds.

The indicator lamp will go out.

Before reaching the end of the period

set, you can check the percentage of

time set which has already been used

up.

Use the On/Off touch control to

switch the fan on.

Press the grease filter touch control.

One or several of the indicator lamps

for the / touch controls will flash.

The number of flashing lamps shows

the percentage of the operating time

which has already been used up.

1 lamp = 25 %

2 lamps = 50 %

3 lamps = 75 %

4 lamps = 100 %

The operating hours completed remain

in memory, even when the machine is

switched off or there is a power cut.