Miele DA 2270 EXT 작동 및 설치 지침 - 페이지 12

{카테고리_이름} Miele DA 2270 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2270 EXT 40 페이지. Cooker
Miele DA 2270 EXT에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (40 페이지), 사용자 설명서 (40 페이지)

페이지 인쇄

Modes of operation

The rangehood works with

. . . air extraction:

The air is drawn in and cleaned by the

grease filters and directed outside.

If the on-site ventilation system does

not have a non-return flap, then the

non-return flap supplied with the

appliance must be fitted in the exhaust

socket in the motor unit.

The DA 2210 has two motors and

requires two non-return flaps to be

fitted.

Having a non-return flap fitted in the

ducting ensures that air, once ducted

to the outside, cannot get back into the

room again.

The flap is closed when the rangehood

is switched off.

When the rangehood is switched on,

the non-return flap opens for the

cooking vapours to be blown directly

outside.

Please note, the performance of

this rangehood hinges greatly on

the installed ducting to vent the

vapours. Poor choice of ducting

results in poor rangehood

performance. For ducting

recommendations, please refer to

the relevant section in these

operating instructions or contact a

specialised installer.

. . . air recirculation:

(requires a conversion kit and charcoal

filters: see "Technical Data")

The air is drawn in and cleaned first by

the grease filters and then by the

charcoal filters (2 on the DA 2250, DA

2270 and 4 on the DA 2210). The

cleaned air is then recirculated back

into the kitchen.

Before using the rangehood in

recirculation mode, ensure that the

charcoal filters are in place. See

"Cleaning and care".

. . . an external motor:

(EXT models only)

EXT models are designed to be

connected to an external motor located

outside the room.

The external motor is connected to

the rangehood by means of a

control cable, and is operated by

the controls on the rangehood.