Miele DA 229-2 운영 및 설치 매뉴얼 - 페이지 4

{카테고리_이름} Miele DA 229-2에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 229-2 40 페이지. Cooker
Miele DA 229-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Warning and Safety instructions

This appliance conforms to current

safety requirements. Incorrect use

can lead to injury and damage to

the appliance.

Before installation and before using

for the first time read the operating

instructions carefully. They contain

important information on safety, use

and maintenance of the appliance.

This way you will avoid the risk of

accidents and damage to the ap-

pliance.

Keep these operating instructions in

a safe place and pass them on to

any future user.

The appliance is intended for do-

mestic use only.

The manufacturer cannot be held re-

sponsible for damage caused by im-

proper use of the appliance.

Before connecting the appliance

to the mains supply make sure that

the voltage and frequency details on

the data plate correspond with the on-

site electricity supply. This data must

correspond in order to avoid risk of

damage to the appliance. Consult a

qualified electrician if in doubt.

The electrical safety of this ap-

pliance can only be guaranteed

when continuity is complete between

the appliance and an effective earthing

system which complies with local and

national regulations. It is most import-

ant that this basic safety requirement is

tested by a qualified electrician. The

manufacturer cannot be held respon-

sible for the consequences of an inade-

quate earthing system (e.g. electric

shock).

Installation work and repairs may

only be carried out by suitably

qualified and competent persons to en-

sure safety. Repairs and other work by

unqualified persons could be dan-

gerous and the manufacturer will not

be held responsible.

This equipment is not designed for

maritime use or for use in mobile in-

stallations such as caravans, aircraft

etc. However it may be suitable for

such usage subject to a risk assess-

ment of the installation being carried

out by a suitably qualified engineer.