Miele DA 2360 작동 및 설치 지침 - 페이지 24

{카테고리_이름} Miele DA 2360에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2360 36 페이지. Ventilation system
Miele DA 2360에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (36 페이지)

Installation



Before installation, it is important

to read the information contained in

this chapter and in the "IMPORTANT

SAFETY INSTRUCTIONS" chapter.

The ventilation hood is intended for

installation in wall cabinets, ventilation

housing units, vent flues or above

kitchen islands.

 Before installing, check to make sure

that the top of the appliance will be

accessible once it is installed.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

1 non-return flap

for fitting into the exhaust socket on

the motor unit (not needed for

recirculation mode). Depending on the

model, the non-return flap may already

be mounted.

4 M5 x 40 mm screws, 4 washers,

4 M5 nuts for securing the ventilation

hood to an interim shelf

10 M4 x 8 mm screws to secure the

ventilation hood

4 M4 x 12 mm screws for additional

securing of the ventilation hood to

uneven surfaces

Conversion kit for recirculation

mode

including directional unit, hose, and

hose clips (not supplied, but available

as an optional accessory. See

"Technical data").