Miele DA 239-3 작동 및 설치 지침 - 페이지 29
{카테고리_이름} Miele DA 239-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 239-3 40 페이지. Ventilation system
Miele DA 239-3에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)
페이지 인쇄^ Drill the 4 marked holes for the upper
and lower retaining plates using a
(3 mm) diameter bit.
^ Screw the upper and lower retaining
plates securely to the wall.
^ Screw the 2 motor assembly support
screws into the marked locations.
Allow the screw heads to protrude
1
about
/
" (5 mm) so the motor can
4
hang on them.
^ Place the non-return flap into the
exhaust connection at the top of the
motor assembly so that the flaps
open in the "up" direction.
^ Turn the non-return flap slightly to
1
lock it in place.
/
"
8
^ The hood is designed for use with 6"
(150 mm) ductwork.
If 5" (125 mm) ductwork is to be used
a reducing collar must be installed.
(see "Air extraction").
29