Miele DA 249-2 Alu EXT 작동 및 설치 지침 - 페이지 22

{카테고리_이름} Miele DA 249-2 Alu EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 249-2 Alu EXT 36 페이지.

Cleaning and care

Changing a halogen lamp

Disconnect the cooker hood from

the mains supply by

– switching it off at the wall socket

and removing the plug, or

– withdrawing the fuse from the

fused spur connection unit, or

– withdrawing the mains fuse, or

– removing the screw-out fuse, (in

countries where this is applicable).

Exercise caution when changing

halogen lamps. They get very hot

during use and remain hot for some

time after being switched off.

Do not touch the surface directly

when changing a lamp as grease

particles from your fingers will ad-

here to the surface and damage it.

Please follow manufacturer's instruc-

tions.

^ Remove the stainless steel filter (see

"Cleaning and care – Remove the

stainless steel filter").

^ Pull the halogen lamp out of its

socket. Take care not to let the lamp

fall onto the hob below.

^ Fit the new halogen lamp into its

socket and carefully push it into posi-

tion.

When replacing a defective lamp it

is essential to use exactly the same

type of lamp (see "Technical data"

for lamp specification).