Miele DA 2510 작동 및 설치 지침 - 페이지 42
{카테고리_이름} Miele DA 2510에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 2510 48 페이지.
페이지 인쇄Activating Con@ctivity 2.0
Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
to be used, the cooktop must be fitted
with the Con@ctivity dongle.
Please read the instructions for the
Con@ctivity 2.0 dongle before
installation.
Activating Con@ctivity 2.0
In order to use the Con@ctivity 2.0
function, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the rangehood and the cooktop at
the same time. Activation on the
rangehood is described below.
Activation on the cooktop is described
in the relevant Operating instructions.
Please refer to the Operating
instructions before starting.
Activate the rangehood first, then the
cooktop.
42
Activating the rangehood
The cooktop and rangehood must be
switched off.
Press the run-on option control 515
for approx. 10 seconds until the
indicator for the power setting 1 lights
up.
Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
The rangehood is now in signing on/off
mode.
If a wireless connection has not yet
been established, 2 and 3 will flash at
the same time.
If a wireless connection has already
been established, 2 and 3 will light up
constantly (Con@ctivity 2.0 is already
activated or a remote control is signed
on).
To activate Con@ctivity 2.0, press
"".
The search for a signal will start.
Meanwhile, start the activation of the
cooktop.