Miele DA 262 i 사용 설명서 - 페이지 19

{카테고리_이름} Miele DA 262 i에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 262 i 28 페이지.

Installation

Attach the spacer bar to the guide

rail (2) located behind the light tube.

Fitting the light tube cover

– DA 262 i

Position the light tube cover and

screw into place (see diagram).

– DA 272 i, DA 292 i

Attach the extension pieces supplied

to the light tube cover, then position

the now extended light tube cover

and screw into place.

Pull the deflector plate out to its limit.

Pull off the transit strips on each side.

For cooker hoods without a front panel

or lightshield:

Push the Allen screws from the

accessory kit onto the cover caps

until the screw heads lie directly

under the holes in the cover caps.

Secure the cover caps on both sides

of the deflector plate using the Allen

screws.

Lightshields . . .

. . . weighing up to 600 g can be fitted

normally.

. . . Those weighing over 600 g need to

have the springs in the snap fittings pre-

tensioned:

Installation