Miele DA 3060 운영 및 설치 매뉴얼 - 페이지 32

{카테고리_이름} Miele DA 3060에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3060 36 페이지. Cooker
Miele DA 3060에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

페이지 인쇄

Electrical connection

All electrical work should be

undertaken by a suitably qualified

and competent person in strict

accordance with current national

and local safety regulations

(BS 7671 in the UK).

Installation, repairs and other work

by unqualified persons could be

dangerous, for which the

manufacturer cannot be held liable.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

Do not connect the appliance to the

mains electricity supply by an

extension lead. These do not

guarantee the required safety of the

appliance.

The connection data is given on the

data plate. This is visible when the

grease filters have been removed.

Ensure that this data matches the

household mains supply.

Connection of this appliance should be

made via a suitable isolator or a double

pole fused spur connection unit which

complies with national and local safety

regulations and the On-Off switch

should be easily accessible after the

appliance has been built in.

When switched off there must be an

all-pole contact gap of 3 mm in the

switch (including switch, fuses and

relays according to EN 60335).

If the switch is not accessible after

installation (depending on country), an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to protect

the appliance with a suitable residual

current device (RCD). Contact a

qualified electrician for advice.

Important

This appliance is supplied for

connection to an a.c. 230 V single

phase 50 Hz supply.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue

= neutral

Brown

= live

WARNING:

THIS APPLIANCE MUST BE

EARTHED