Miele DA 3180 작동 및 설치 지침 - 페이지 25

{카테고리_이름} Miele DA 3180에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3180 40 페이지. Ventilation system
Miele DA 3180에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (40 페이지), 치수 (1 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

= Depth of carcase

appliance

^ The depth of appliance

on the lightshield being used:

– a Lightshield to match existing

kitchen furniture

– b DFB lightshield (optional

accesssory)

– c No lightshield.

This is based on a lightshield which

aligns with the front edge of the

carcase.

If the lightshield is further forward or

back, measurement

adjusted accordingly.

When installing a shelf or partition wall,

the building-in space at the back must

not be less than 180 mm.

If it is less than 180 mm, position the

appliance further back, and reduce

measurement

accordingly. The

building-in position can be rectified

later by adjusting the depth.

^ Cut the spacer strip supplied to

measurement

Score along the groove for the

measurement as shown, and

remove the surplus.

minus depth of

depends

will need to be

^ Screw the spacer strip to the bottom

of the sides of the housing, flush with

the rear wall.

^ Draw a vertical line up both inside

walls of the housing from the front of

the spacer strip.