Miele DA 3190 작동 및 설치 지침 - 페이지 15

{카테고리_이름} Miele DA 3190에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3190 40 페이지. Ventilation system
Miele DA 3190에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 치수 (1 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

A range of Miele branded cleaning and

conditioning agents are available to

order through your Miele Dealer/

Chartered Agent, the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

Before any cleaning or

maintenance work is carried out,

disconnect the cooker hood from the

mains supply.

Halogen lamps get very hot

during use and remain hot for some

time after being switched off. The

hot lamps are also susceptible to

damage from damp cleaning. Wait a

few minutes after switching off

before commencing cleaning.

Housing

General notes

Warning: The surfaces and controls

are susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using warm water with a

small amount of washing-up liquid

applied with a well wrung-out soft

sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Cleaning and care

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners or cream cleaners

and abrasive sponges, as well as pot

scourers or sponges which have

been used previously with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

with a proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a

conditioning agent for stainless steel

can also be used. Follow the

instructions on the label, and apply

sparingly with an even pressure in the

direction of the "grain".