Miele DA 3460 EXT 운영 및 설치 매뉴얼 - 페이지 32

{카테고리_이름} Miele DA 3460 EXT에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3460 EXT 40 페이지.

Installation

Setting up for recirculation

mode

If site conditions are not suitable for the

cooker hood to be used with air

extraction, the appliance must be set

up for recirculation.

For this, conversion kit DUU 151

(available from your Miele dealer or the

Miele Spare Parts Dept.) is required.

You will also need a charcoal filter (see

"Technical data").

^ Fit the conversion kit as described in

the installation instructions supplied

with the kit.

^ Make sure that the slats in the

exhaust grille point towards the

centre of the room and not towards a

wall or the ceiling.

A non-return flap is not used in

recirculation mode.

^ Fit the charcoal filter (see "Cleaning

and care").

Refer to the notes in "Electrical

connection" and "Warning and

Safety instructions" before

connecting to the electricity supply.

^ For appliances connected to an

external motor (EXT models):

Connect the cooker hood to the

external motor using the connecting

cable and the 6-pole plug connector.

^ Separate fitting instructions are

supplied with the external motor.