Miele DA 3496 EXT 작동 및 설치 지침 - 페이지 24

{카테고리_이름} Miele DA 3496 EXT에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3496 EXT 48 페이지.
Miele DA 3496 EXT에 대해서도 마찬가지입니다: 작동 및 설치 지침 (48 페이지)

Cleaning and care

Changing a lamp

The lamps should be replaced with the

following:

Manufacturer................................ EGLO

Lamp type .................................... GU10

Specification ................................ 11427

Wattage ........................................... 3 W

These lamps are available from Miele or

from specialist retailers.

 Pull out the deflector plate, and

remove the grease filter as described

earlier.

 Switch off the fan and the lighting.

Note that lamps become very hot

when in use.

They can cause burns even after

being switched off for some time.

Allow the lamps to cool down for a

few minutes before changing them.

 Remove the charcoal filter if the

rangehood is being used in

recirculation mode.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Push down the lighting unit slightly

via the opening in the safety panel.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filter and, if being

used in recirculation mode, the

charcoal filter.