Miele DA 3560 작동 및 설치 지침 - 페이지 32

{카테고리_이름} Miele DA 3560에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 3560 44 페이지. Cooker hood

Installation
^ Fit the cooker hood into the wall unit
from below, guiding it over the safety
notch, as shown. Push it back until
the spacer strip is flush with the wall.
^ Pull the deflector plate downwards
slightly and then towards you.
32
^ Tighten the four securing screws
from below.
^ When fitting a 900 mm wide cooker
hood in a 600 mm wide wall unit,
insert the two rear screws at this
stage. In this instance you will also
need to secure it to the base on
either side.
^ Push the deflector plate back in.