Miele DA 400 운영 및 설치 매뉴얼 - 페이지 23

{카테고리_이름} Miele DA 400에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 400 36 페이지. Cooker
Miele DA 400에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

Fitting and replacing the
charcoal filter
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
It is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New filters can be purchased from
your Miele dealer or from the Miele
Spare Parts Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the
canopy.
When fitting for the first time:
^ Set the operating hours counter to
suit your requirements (see
"Operation").
Cleaning and care
Always replace the charcoal filter im-
mediately if
– the indicator lamp for the charcoal
filter touch control lights up,
or
– if it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
^ After fitting the new charcoal filter,
press the charcoal filter touch control
for approx. 3 seconds to re-set the
operating hours counter.
The indicator lamp will go out.
^ If a charcoal filter is replaced before
the operating hours counter has
reached its maximum, the charcoal
filter touch control should be pressed
for approx. 6 seconds to reset the
counter.
23