Miele DA 400 EXT 운영 및 설치 매뉴얼 - 페이지 17

{카테고리_이름} Miele DA 400 EXT에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 400 EXT 36 페이지. Cooker
Miele DA 400 EXT에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지)

페이지 인쇄

1. Description of the Appliance

Filter operating hours counter

The number of hours the appliance has

been in operation is stored in memory.

The indicator lamp for the grease filter

touch control will come on after 30

hours of operation. The grease filters

must then be cleaned.

After the filters have been replaced, the

filter operating hours counter must be

reset.

^ To do this, press and hold the grease

filter touch control for about 3

seconds.

The indicator lamp for the touch control

will go out.

For recirculation mode, the operating

hours counter for the charcoal filter

needs to be set to the required time

(see "Setting and altering the charcoal

filter operating hours counter").

The indicator lamp for the charcoal filter

touch control will light up after the

cooker hood has operated for the

number of hours set. The charcoal

filter must then be replaced with a new

one.

After the charcoal filter has been

replaced, the filter operating hours

counter must be reset.

^ Press the charcoal filter touch control

for about 3 seconds.

The indicator lamp for the touch control

will go out.

Reading the filter operating hours

counter

To check the percentage of time set

already used:

^ Press the On/Off touch control to

switch the fan on.

^ Press and hold the grease filter or the

charcoal filter touch control.

One or more of the indicator lamps for

the "– / +" touch controls will flash.

The number of flashing lamps shows

the percentage of the operating time

which has already been used up.

1 lamp

= 25 %

2 lamps = 50 %

3 lamps = 75 %

4 lamps = 100 %

The number of operating hours used

remains in the memory, even when the

appliance is switched off or there is a

power cut.

Operation