Miele DA 403 EXT 운영 및 설치 매뉴얼 - 페이지 23

{카테고리_이름} Miele DA 403 EXT에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 403 EXT 36 페이지. Cooker
Miele DA 403 EXT에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지)

페이지 인쇄

1. Description of the Appliance

Fitting and replacing the

charcoal filter

If the cooker hood is connected for

recirculation, a charcoal filter must be

inserted in addition to the grease filters.

It is designed to absorb cooking

odours.

It is fitted in the canopy above the

grease filters.

New filters can be purchased from

your Miele dealer or from the Miele

Spare Parts Department.

See back cover for contact details,

and "Technical data" for the model

number of the filter.

^ Before fitting or replacing a charcoal

filter, the grease filters must first be

taken out (see previous section for

instructions on how to do this).

^ Take the charcoal filter out of its

packaging.

^ Insert the charcoal filter into the

canopy.

When fitting for the first time:

^ Set the operating hours counter to

suit your requirements (see

"Operation").

Cleaning and care

Always replace the charcoal filter im-

mediately if

– the indicator lamp for the charcoal

filter touch control lights up,

– if it is no longer effective in absorbing

kitchen odours.

It should, however, be replaced at least

every 6 months.

Used charcoal filters can be disposed

of with the normal household waste.

^ After fitting the new charcoal filter,

press the charcoal filter touch control

for approx. 3 seconds to re-set the

operating hours counter.

The indicator lamp will go out.

^ If a charcoal filter is replaced before

the operating hours counter has

reached its maximum, the charcoal

filter touch control should be pressed

for approx. 6 seconds to reset the

counter.