Miele DA 408 작동 및 설치 지침 - 페이지 6
{카테고리_이름} Miele DA 408에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 408 36 페이지. Ventilation system
Miele DA 408에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 제품 치수 (2 페이지), 설치 지침 (1 페이지), 작동 및 설치 지침 (36 페이지), 작동 및 설치 지침 (36 페이지)
iMPORTANT
SAFETY
iNSTRUCTiONS
mnstaHation
WA..,.G
To reduce the risk of fife onJy
use metal ductwork.
When installing the hood, follow the
recommended
m,n,mum
safety
distances between a Miele cooktop and
the hood:
- 22" (55 cm) above electric cooktops,
- 26" (65 cm) above gas cooktops,
- 26" (65 cm) above an open grill.
If local building codes require a greater
safety distance, follow their
requiremenL
For non-Miele cooking appliances
maintain the safety distances
recommended
by the appliance
manufacturer.
If there is more than one appliance
beneath the hood and they have
different minimum safety distances
always select the greater distance.
Be careful not to damage hidden
or
electrical wiring
plumbing when
cutting or drilling into the wall or ceiling.
Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance, (e.g.
danger of overheating)_
oo not ,nsta,,
this h ood over
cooktops burning solid fuel.
Any fittings, sealant, or materials
used toinstall the ductwork
must
be made of approved non-flammable
materials.
Never connect an exhaust hood to
an active chimney, dryer vent, vent
flue, or room ventilating ductwork. Seek
professional advice before connecting
an exhaust hood vent to an existing,
inactive chimney or vent flue.
Ducted fans must always be
_,ventedoutdoors,
Make sure that the airflow in the
room is sufficient for combustion
and exhausting of all non-electric
heating appliances (water heaters, gas
cooktops, gas ovens, etc.), otherwise
backdrafts may occur. Follow the
heating manufacturer's guidelines and
safety standards or those published by
the National Fire Protection Association
(NFPA), or the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE).
If in doubt, consult an experienced
professional.