Miele DA 449-4 운영 및 설치 매뉴얼 - 페이지 21

{카테고리_이름} Miele DA 449-4에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 449-4 40 페이지. Cooker

^ After cleaning, leave the filters to dry

for a while on an absorbent surface

before putting them back in place.

^ When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

^ After cleaning the filters, press the

grease filter control for approx.

3 seconds to reset the operating

hours counter.

The indicator lamp will go out.

If the stainless steel outer filter and the

grease filter are cleaned

operating hours counter has reached

its maximum, the grease filter control

should be pressed for approx. 6

seconds to reset the counter to zero.

^ Holding the grease filter at an angle,

fit it into the front of the chimney and

then push it into position along the

front edge.

^ Then push it up into position at the

back, making sure it clicks into

position on both sides.

^ Fit the outer filter into the appliance

so that it hooks into the retainers at

the

the back, then push it upwards at the

front and make sure it engages in the

quick-release mechanism.