Miele DA 489-4 EXT 운영 및 설치 매뉴얼 - 페이지 37
{카테고리_이름} Miele DA 489-4 EXT에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 489-4 EXT 40 페이지. Cooker
Miele DA 489-4 EXT에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)
페이지 인쇄
The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Potential free connection
This can be used to operate a further
appliance via the On/Off button s on
the cooker hood.
The potential free contact on the
DSM 400
can, for example, be used
in a cooker hood with an external motor
...EXT, which is connected to a central
ducting system.
The contact can then be used to
operate an electrically driven non-return
flap
which is connected to the
central extraction unit
Operation with DSM 400 control module
.
Components used in the central
ducting system are not supplied by
Miele.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control module can be used to
switch on the cooker hood lighting and
also to dim it via a light switch in the
house.
Installation
The tower needs to be removed before
the control module can be fitted to the
fan unit.
A fixing bracket is required for fitting
the control module. This is available
as an optional accessory (M.-Nr.
8363350).
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.
37