Miele DA 5391 W 운영 및 설치 매뉴얼 - 페이지 14
{카테고리_이름} Miele DA 5391 W에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 5391 W 40 페이지. Miele ventilation system operating and installation instructions
Miele DA 5391 W에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 제품 치수 (2 페이지), 작동 및 설치 지침 (36 페이지)
페이지 인쇄
Operation
Filter timers
Grease filters
A timer monitors the hours of fan
operation. The indicator for the grease
filter will light after 30 hours of
operation. The grease filters must then
be cleaned.
After the grease filters have been
cleaned and put back in place, the
grease filter timer must be reset.
^ To do this, press the grease filter
button for approx. 3 seconds.
The indicator will go out.
Charcoal filter
Recirculation mode only
The timer for the charcoal filter is not
preset. Please program this timer, see
"Operation - Reprogramming the
charcoal filter timer".
The charcoal filter indicator will light
once the selected time has elapsed.
The charcoal filter must then be
replaced and the charcoal filter timer
reset.
^ To do this, press the charcoal filter
button for approx. 3 seconds.
The indicator will go out.
14
Checking the filter timers
^ Press the On/Off button to turn the
fan on.
^ Press and hold the grease or
charcoal filter button.
The number of flashing "–/+" indicators
show the percentage of programmed
hours that have been used.
1 indicator = less than 25 %
2 indicators = less than 50 %
3 indicators = less than 75 %
4 indicators = less than 100 %
This information will remain stored in
memory in the event of a power failure.