Miele DA 6000 W 사용 설명서 - 페이지 14
{카테고리_이름} Miele DA 6000 W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 6000 W 40 페이지. Cooker hood
Miele DA 6000 W에 대해서도 마찬가지입니다: 설치 계획 (24 페이지)
페이지 인쇄
Miele|home
Con|ctivity
This cooker hood is communication
enabled.
Communication module XKM 2000 DA
a, available as an optional extra,
enables the operation of the cooker
hood to be automatically controlled by
the operating status of a Miele electric
hob with onset controls.
For communication to take place, the
hob must be fitted with the relevant hob
communication module b.
The hob transmits information about its
operating status to the cooker hood via
the household power supply
(Powerline) c.
14
– When the hob is switched on, the
canopy opens, the cooker hood hob
lighting switches on and after a short
time the cooker hood fan switches on.
– During cooking, the cooker hood
automatically sets its power level
according to the number of cooking
zones in operation and their power
levels.
– After switching the hob off, the
cooker hood fan and hob lighting will
switch off automatically after a period
of time.
The canopy remains open.
The communication module is fitted
when the cooker hood is installed in the
area of the motor and is connected to
the controls of the cooker hood.
The appliance specific control cabling
set is also required.
For detailed information about this
function and fitting instructions, please
read the operating instructions for the
XKM 2000 DA and the installation
instructions for the control cabling set.
Installation must be carried out by a
Miele service technician or suitably
qualified electrician.
Communication module
XKM 2000 DA . . . . . . . M.-Nr. 7 209 000
Control cabling set
DA 6000 W . . . . . . . . . M.-Nr. 7 707 980