Miele DA1180 작동 및 설치 지침 - 페이지 21
{카테고리_이름} Miele DA1180에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA1180 32 페이지. Built-under ventilation hood
Miele DA1180에 대해서도 마찬가지입니다: 사양 (4 페이지), 작동 및 설치 지침 (32 페이지)
페이지 인쇄
Before installation read the
information in the "Appliance
Dimensions" and " Important Safety
Instruction" chapters.
This is especially crucial when using
the ventilation system at the same
time as another heat-producing
appliance that uses air from the
same room.
^ Remove the grease filter.
The casing of stainless steel models is
covered with a protective film to
prevent scratching during transport.
^ Remove the film from the casing and
from the grease filter frames before
installing. It can be removed without
tools.
Diverter
A diverter must be inserted at the back
of the hood.
Its position depends on the operating
mode.
In air extraction mode, it guides the air
outside through an opening at the back
of the casing.
In air recirculation mode, it closes the
opening and guides the air to the outlet
at the front.
^ Check the position of the diverter.
^ If required, change the diverter
position to match the desired
operating mode.
Extraction
Recirculation
^ To do this, push on the two latching
hooks, pull the diverter out, turn it,
and push it back in until it clicks into
place.
Installation
21