Miele DA2210 작동 및 설치 지침 - 페이지 27
{카테고리_이름} Miele DA2210에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA2210 44 페이지. Cooker
Miele DA2210에 대해서도 마찬가지입니다: 작동 및 설치 지침 (36 페이지), 치수 매뉴얼 (1 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (40 페이지), 사용자 설명서 (40 페이지), 작동 및 설치 지침 (40 페이지), 설치 지침 매뉴얼 (19 페이지)
Changing a light bulb
The bulbs should be replaced with the
following:
GU/GZ 10, 120 V, 50 W
Replacement bulbs are available from
Miele.
Disconnect the hood from the
electrical supply before replacing the
bulbs (see "IMPORTANT SAFETY
INSTRUCTIONS").
Remove the grease filters.
Remove the charcoal filters if the
hood is used in recirculation mode.
Please note that bulbs become very
hot during use.
They can cause burns even after
being shut off for some time.
Allow the bulbs to cool down for a
few minutes before changing them.
Cleaning and care
Reach through the opening in the
safety panel and push the lighting
unit slightly downwards.
Turn the bulb counter-clockwise and
pull it out.
Screw the new bulb into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
Replace the grease filters and, if
using the hood in recirculation mode,
the charcoal filters.
27