Miele DA250-4 작동 및 설치 지침 - 페이지 16
{카테고리_이름} Miele DA250-4에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA250-4 32 페이지. Miele da250-4 hoods: install guide
Miele DA250-4에 대해서도 마찬가지입니다: 치수 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (10 페이지)
페이지 인쇄
Cleaning and care
Before cleaning or servicing the
hood, disconnect it from the power
supply by either removing the fuse,
unplugging it from the outlet or
manually "tripping" the circuit
breaker.
Cleaning the casing
,
Never use on the hood:
- cleaning agents containing soda,
acids, chlorides or thinners,
- abrasive cleaning agents
e.g. powder or cream cleansers,
- steel wool or abrasive sponges,
e.g. pot scourers or sponges which
have been previously used with
abrasive cleaning agents,
- limescale removers,
- caustic (oven) cleaners.
They will damage the surface.
^ The exterior surfaces and controls
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry using a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
^ Glass surfaces can be cleaned using
glass cleaner.
16
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become dis-
colored or damaged if not cleaned
regularly.
Do not use a stainless steel cleaner
on these controls.