Miele DA259-3 운영 및 설치 매뉴얼 - 페이지 27

{카테고리_이름} Miele DA259-3에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA259-3 32 페이지. Product dimensions decorator wall hood
Miele DA259-3에 대해서도 마찬가지입니다: 제품 치수 (2 페이지)

페이지 인쇄

Please read and follow the

personal injury. Follow all local building

codes when installing the hood.

to reduce the risk of

– The ducting should be as short and

straight as possible, and the number

of sharp bends should be minimized.

– For most efficient air extraction, the

diameter of the ductwork should not

be less than 6" (150 mm). Use of flat

ducts also reduces the air extraction

efficiency.

– Noise levels of the hood will increase

if flat ducts or round ducts of less

than 6" (150 mm) in diameter are

used.

– Use smooth or flexible pipes made

from approved non-flammable

materials for exhaust ducting.

– Where the ductwork is horizontal, it

must slope away from the hood at

least

" per foot (1cm per meter) to

prevent condensation dripping into

the appliance.

– If the exhaust is ducted through an

outside wall, a Miele Telescopic Wall

Vent can be used.