Miele DA279-4 운영 및 설치 매뉴얼 - 페이지 22

{카테고리_이름} Miele DA279-4에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA279-4 40 페이지. Cooker
Miele DA279-4에 대해서도 마찬가지입니다: 제품 치수 (2 페이지), 설치 매뉴얼 (1 페이지), 운영 및 설치 매뉴얼 (36 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Cleaning and care

Before any cleaning or maintenance

work is carried out, disconnect the

cooker hood from the mains supply.

Ensure that:

– it is switched off at the wall socket

and the plug is withdrawn, or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed (in

countries where this is applicable).

A range of Miele branded cleaning and

conditioning agents are available to

order through your Miele Dealer /

Chartered Agent, the Miele Spare Parts

Department, or via the internet on

www.miele-shop.com.

Housing

General notes

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using a Miele E-Cloth, or

with water and a small amount of

washing-up liquid applied with a well

wrung-out soft sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents e.g.

powder cleaners or cream cleaners,

and abrasive sponges, e.g. pot

scourers or sponges which have

been previously used with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-Cloth or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a proprietary

conditioning agent for stainless steel

can also be used. Follow the

manufacturer's instructions, and apply

sparingly with an even pressure in the

direction of the "grain".