Miele DA5190 작동 및 설치 지침 - 페이지 14

{카테고리_이름} Miele DA5190에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA5190 36 페이지. Decorator wall hood
Miele DA5190에 대해서도 마찬가지입니다: 제품 치수 (2 페이지)

페이지 인쇄

Operation

Grease filter timer

A timer monitors the hours of fan

operation. The indicator for the

grease/charcoal filter will light red after

30 hours of operation or the

preselected time. The grease filter

must then be cleaned. See "Cleaning

and Care/Grease filter".

After the grease filter has been cleaned

and put in place, the grease filter timer

must be reset.

^ To do this, press the grease/charcoal

filter button for about 3 seconds while

the fan is running.

The indicator will go out.

Charcoal filter timer

Recirculation mode only

The timer for the charcoal filter is not

preset. Please program this timer, see

"Operation/Reprogramming the

charcoal filter timer".

The charcoal filter indicator will light

blue once the selected time has

elapsed. The charcoal filter must then

be replaced and the timer reset.

^ To do this, press the grease/charcoal

filter button for about 3 seconds.

The indicator will go out.

Checking the filter timer

To check the percentage of time

already used:

^ Press the On/Off button to turn the

fan on.

For the grease filter timer

^ Press and hold the grease/charcoal

filter button. The indicator lights red.

For the charcoal filter timer

^ Press the grease/charcoal filter

button twice and hold. The indicator

lights blue.

The number of flashing "–/+" indicators

show the percentage of programmed

hours that have been used.

1 indicator = 25 %

2 indicators = 50 %

3 indicators = 75 %

4 indicators = 100 %

This information will remain stored in

memory in the event of a power failure.